BIS Certification for Asbestos Cement Roofing Fittings IS 1626 (Part 3)

BIS Certification for Asbestos Cement Roofing Fittings as per IS 1626 (Part 3) is done to verify that the fittings are in compliance with the prescribed Indian Standards of strength, durability, dimensional and weather resistance. The ISI mark indicates that the products can be used in the residential, industrial and agricultural roofing applications. 

Introduction to ISI Mark Certification 

The Bureau of Indian Standards (BIS) awards the ISI Mark Certification that shows the compliance with the applicable Indian Standards by testing the product, inspecting the factory, and performing constant follow-up. In the case of asbestos cement roofing fittings, BIS certification ensures that the fittings meet the requirements of the IS 1626 (Part 3).

BIS Certified manufacturers undergo regular checks and samples testing to maintain constant quality and controlled production and conformity to safety and performance standards. The use of ISI-marked roofing fittings is very common in construction endeavors in India. 

Key advantages of ISI Mark Compliance

1. Regulatory Compliance :  Permits legal production and sale, based on reported BIS standards.
2. Structural Reliability :  This is to ensure that fittings are of sufficient strength and durability to be used on roofing.
3. Market Acceptance : Favored by the contractors, government construction projects and the builders.
4. Tender Eligibility :  It allows one to participate in public sector and infrastructure tenders.
5. Brand Credibility :  Builds on confidence between consumers, design engineers and regulators. 

Overview of IS 1626 (Part 3)

IS 1626 (Part 3) is significant because it makes asbestos cement roofing fittings safe, performing, and durable in the long-term. The standard provides composition requirements of asbestos fiber and cement content that can be used to provide uniformity and strength.

It stipulates dimensions, tolerances, and shape accuracy in order to fit well into roofing sheets. Transverse breaking load, water absorption and weather resistance tests are prescriptive tests that are carried out to check performance under service conditions. Surface finish, curing, marking, packing, and ISI labeling provisions assure durability, traceability and regulatory compliance. 

BIS Registration documentation checklist  

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

Steps for manufacturers to obtain BIS Certification 

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS examines the submissions of documents and test reports and may request clarification.
6. BIS Audit at Factory : The audit of the product samples carried out by the BIS inspectors is done at the factory. 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

Expected timeframe for BIS Licensing Approval

According to IS 1626 (Part 3), a BIS license for Asbestos Cement Roofing Fittings is expected to take:

For Simplified Procedure (Indian manufacturers)

Average 40-45 days

For Normal procedure  

• For Indian Manufacturers : 50-60 days
• For International Manufacturers : Approximately 180 days  

Reasons why EVTL India is the best for BIS Certification

EVTL India is a reputable BIS consultant, which provides end to end certification of building and construction materials. The team is in charge of full documentation, filing in the BIS portal, and coordination with the BIS recognized laboratories.

EVTL India offers highly qualified advice on quality control systems and preparedness of factory audit. Having a good understanding of regulations, they guide manufacturers to complete approvals in the shortest time possible and reduce the risk of compliance. 

Conclusion

To assure the safety of products, their durability and compliance with the regulations, ISI Mark Certification for Asbestos Cement Roofing Fittings in IS 1626 (Part 3) is necessary. ISI-marked fittings are popular in construction works and government procurement.

Through professional help of EVTL India, manufacturers are able to facilitate the certification process of the BIS, as well as, to comply with the Indian Standards, and also be able to provide the certified roofing fittings to the Indian market in confidence. 

Frequently Asked Questions (FAQs)

1. Does BIS certification require asbestos cement roofing fittings?

It is true that BIS certification must be applied to the products which are the subjects of IS 1626 (Part 3).   

2. Who is eligible for BIS certification?

BIS certification can be applied only by manufacturers of fittings made of asbestos cement roofing. 

3. Which tests are made under IS 1626 (Part 3)?

They are dimensional checks, transverse breaking load, water absorption, and weather resistance. 

4. What is the duration of the BIS license?

The BIS license is normally awarded for 1-2 years but may be renewed. 

5. Notes Does ISI require it to be marked after certification?

Yes, certified roofing fitting ISI marking is required following the grant of license.