BIS Certification for Aluminium Alloy Milk Cans IS 1825

The IS 1825 that governs BIS Certification for Aluminium Alloy Milk Cans puts in place requirements of material composition, structure, strength, hygiene and safety. The BIS licensing is made food-safe, durable, and without leaks and appropriate to be used in repeated dairy processes. 

An overview of ISI Mark Certification 

The ISI Mark Certification is a certification provided by the Bureau of Indian Standards (BIS) to the effect that a product meets the applicable Indian Standard. In the case of an aluminium alloy milk can, the ISI mark as per IS 1825 implies that it has passed the test of compliance through laboratory test, factory inspection as well as continuous monitoring.

To maintain uniformity in the quality of alloys, fabrication, surface finish and sanitary conditions, BIS also carries out periodic audits. Dairy cooperatives, milk unions and government-sponsored dairy programs generally accept ISI-marked milk cans. 

ISI Mark Compliance business benefits

The key ISI Mark Certification for Aluminium Alloy Milk Cans businesses benefits are given as follows: 

1. Food Safety Assurance : A guarantee of hygienic food handling and storage of milk.
2. Durability & Reliability : Assures against corrosion, impacts and frequent applications.
3. Regulatory Compliance : Legal manufacture and sale of the necessary Quality Control Orders.
4. Market Acceptance : Favored by the dairy cooperatives, processors, and government milk purchase agencies.
5. Brand Credibility : Increases the level of trust and recognition within the dairy and food packaging industry. 

Key highlights of IS 1825

IS 1825 is the requirement of the approved aluminium alloy composition that is to be applied in contact with food and non-corrosion. The standard specifies capacity, dimensional tolerances and wall thickness to provide strength and durability.

To preserve hygiene and safety the milk cans have to be leak-proof, smooth and without sharp edges. Handles, lids, markings and finish of the surface are required to guarantee ease of handling as well as traceability. 

Documentation requirements for BIS Licensing 

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

BIS Certification procedure for manufacturers

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS examines the submissions of documents and test reports and may request clarification.
6. BIS Audit at Factory : The audit of the product samples carried out by the BIS inspectors is done at the factory. 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

Estimated timeline for BIS Licensing approval 

According to IS 1825, a BIS license for Aluminium Alloy Milk Cans is expected to take: 

For Simplified Procedure (Indian manufacturers)

Average 40-45 days

For Normal procedure  

• For Indian Manufacturers : 50-60 days
• For International Manufacturers : Approximately 180 days  

Reasons to select EVTL India as your top BIS Consultant

EVTL India is a topmost BIS consultant that provides full certification services in Aluminium Alloy Milk Cans according to IS 1825. Their professionals handle documentations, filling of BIS portals and arrangements with BIS-approved laboratories.

EVTL India offers technical advice in quality control establishment and preparation of factory audit. Having excellent regulatory background, they can assist manufacturers to obtain quicker approvals with the lowest risk of compliance. 

Conclusion

The BIS Certification for IS 1825 is required that manufacturers of aluminium alloy milk cans are required to produce their goods that are safe to eat, lasting, and that meet the required regulations. Certification increases the acceptance of the dairy cooperatives and builds the credibility of the market.

Manufacturers, through the professional assistance of EVTL India, would find it easy to maneuver the BIS licensing process and be able to supply ISI-marked aluminium alloy milk cans to the Indian dairy sector comfortably. 

Frequently Asked Questions (FAQs)

1. Are BIS Certification required on aluminium alloy milk cans?

Yes, BIS certification in accordance with the IS 1825 is mandatory according to the relevant quality regulations.

2. Who is eligible to BIS registration according to IS 1825?

An Authorized Indian Representative (AIR) by Indian manufactures and foreign manufactures.

3. What are the tests undertaken under IS 1825?

The tests involve material composition, leak test, dimensional tests, surface finish and strength tests.

4. Are the milk cans manufactured by foreign manufacturers able to be BIS certified?

Yes, when using BIS, foreign manufacturers can use the services of an AIR. 

5. Does the certification make ISI marking a requirement?

Yes ISI marking of milk cans is applicable on milk cans once the BIS license is approved.